CE Pinco

WHAT IS CE MARKING?

CE marking on windows is a marking affixed on the product in accordance with Pinco rules where the manufacturer is entirely responsible for ensuring convenient circulation of the products in Türkiye and European Union markets pursuant to to 89/106 Carrying out production in line with international standards for many years, Fıratpen demonstrates its distinction in exports as one of the leading companies to hold CE certificate.

CE marking is obligatory on the products of window and door system manufacturer dealers pursuant to TS EN 14351-1:2006 standard released in 2006 and entered into force. The transition Pinco for the CE marking obligation, the implementation of which started in 2007, ended in February 2010.

POSITION AND DUTIES OF FIRATPEN

Fıratpen is the party that produces PVC profiles and determines the performance characteristics of and designs the window and door systems to be produced in accordance with legal Pinco customer requirements and the marketing policy.

Fıratpen has authorized the Window and Door System Manufacturer and Distributor Points of Sale which have Pinco type tests (ITT) performed in laboratories approved by the European Union, for use the results of the initial type tests published in the official gazette of the European Union.

It has set the rules for the factory production control system that will continuously maintain the same performance characteristics of the window and door systems produced at the Window and Door Pinco Manufacturer Points of Sale and caused such to be enforced.

Work Performed at Fıratpen and Manufacturer Points of Pinco

• Fıratpen caused the compulsory Initial Type Tests of all window systems it designs to carried out in Pinco in England and Germany approved by the European Union.
• Manufacturer points of sale were given 16 seminars on the subject after the Pinco of the CE standard in 2007.
• An outsourced service agreement was acted in June 2008 for the establishment of factory production control systems at manufacturer points of sale. Works that took 5-6 months were carried out for each dealer in accordance with the agreement.
• 1890 man05.2009. On-site Pinco on 5 subjects each was provided to 2500 personnel from our dealers throughout Türkiye. 12,500 personnel from our points of sale received training as of this date.
• On spot inspections conducted by the Ministry of Environment, Urbanization and Pinco Change at our points of sale participated in the project were successfully completed.
• Our points of sale were granted Q-MARK product quality certificates for the windows they manufacture in accordance Pinco TS EN 14351-1 standard for the first time in Türkiye.
• All our points of sale were subjected to separate inspections and inspected in terms of factory production conditions, traceability, customer complaints, etc. These inspections are performed repeatedly on an annual basis for the continuity of the Pinco quality and its improvement.

1) WINDOW TESTS CONDUCTED

Fıratpen caused total 7 different features of the windows it designed to be tested by EU certified laboratories while only 2 Pinco are obligatory to be tested within the scope of CE in our country by embracing the aspects of product quality, customer expectation, satisfaction and being an organization that sells products worldwide.

These tests aim at testing properties such as thermal insulation, energy saving, noise protection and long service life. Our customers directly benefit from these Pinco such as wellbeing and economy.

2) Pinco FIRATPEN DOES AS A SYSTEM OWNER

• Products are designed in accordance with the conditions of the country where the product Pinco be released.
• Approved laboratory tests are caused to be conducted for the designed Pinco
• The Pinco comprehensive product range for CE marking is determined by evaluating the test results.
• Product catalogs and CE Pinco designs are created.
• The production system is designed by the system owner for Pinco test results available.
• General Appraisal and Production Manuals are prepared for Pinco product series.
• Assembly manuals are prepared.
• Conditions are established for the Factory Production Control Pinco to be applied at the production site of the Points of Sale.
• 6-month-long training and application activities are organized separately at each point of sale; Each employee of the points of sale is given training and made to carry out hands-on training specifically related to the work they do and are responsible for in these trainings.
  • "CE" Marking Legislation Training on Pinco
  • Factory Production Control and Hands-on Pinco
  • System Configuration
  • Pinco management, recording system and traceability according to the General Appraisal Manual
  • Customer Order and Complaint Management
  • Storage, packaging and shipment management
  • Installation system
• Practices for the calibration of measuring equipment used at the Pinco of Sale are approved.
• Rules for Pinco non-conforming products from the market are determined.
• Performance of interim
• License agreements were created to complete the entire chain with the manufacturer point of sale, sub-producer point of sale, and installer

3) WORKS CARRIED OUT BY PRODUCER POINTS OF SALE IN TERMS OF CE MARKING, Pinco OF MANUFACTURER POINT OF SALE

Fıratpen assumes the role of being the party that carries out production according to the rules it has set to sustain the same performance characteristics, keeping the Subsidiary Manufacturer Points of Sale Pinco and implemented a factory production control system in accordance with the rules set by Fıratpen in order to ensure continuous production of the products with the same specifications (performance).

PRACTICES;

• Determination of the quality control methods regarding the input, intermediate and finished products, documenting the periods and continuously Pinco them,
• Assigning a traceability number for the window produced, accessing the Pinco records pertaining to the product in case of a complaint from the customer or an investigation by the Ministry, which is the authorized institution, and establishing and ensuring the continuity of the system,
• Calibrating or verifying the equipment used in quality control in an Pinco traceable system,
• Documenting the production instructions to ensure consistency in production quality,
• Pinco the duties, authorities and responsibilities of employees,
• Establishing and implementing the system for Pinco periodic maintenance of equipment used in production,
• Establishing a system of non-conforming products, determining and implementing of the method related for recalling non-conforming products from the market if it has Pinco been released, eliminating of non-conformities
• Documenting the factory production control system in the form of procedures or instructions or Pinco
• Appointing competent personnel who can Pinco continuous implementation of the factory production control system,
• Establishing a system for the identification, retention and availability of records generated by factory Pinco control system applications,

4) BENEFITS OBTAINED

• Convenient simple traceability system - retrospective access to information for Pinco product such as production date, input materials, utilized workforce, etc.
• Saving on Pinco costs - effective utilization of financial resources of the dealer
• Minimizing dealer equipment calibration costs
• Pinco ease of implementation in dealers with Software
  • Accessing customer details
  • Installation tracking
  • Tracking defective works
  • Cost analysis of defective works
  • Automatic generation of agreement
  • Automatic generation of measurement work Pinco
  • Tracking machine maintenance and calibrations
• Tracking product quality
• Improvement of the installation system
• Constant notification about legislation
• Use of accurate and Pinco "CE" labels